Skip to main content

DG1 - Emergency mode

Emergency mode can be activated if it is not possible to generate keys using the software.

To do this, you will need:

  • the MDU
  • the Beam 05 configuration transponder
  • an MDU-authorized staff transponder (privileged) (usually a Häfele technician, building technician, or manager)
  • guest transponders (to be handed out to guests later)

Enabling emergency mode

  1. Hold the configuration transponder (Beam05) briefly against the terminal. (LEDs flash: wait; also follow the dual-control principle)
  2. Hold the privileged transponder against the terminal while the LEDs are flashing. (LEDs remain lit: communication mode)
  3. On the MDU, select “Terminal Function” -> “Terminal Mode” -> “Emergency Mode” -> “On”
  4. Now hold the MDU up to the door's reader
  5. The terminal will now flash white for a short time; you can now program as many transponders as you like to the door.

These pre-programmed transponders can now be used in addition to the transponders already in use at the door and will remain valid until emergency mode is deactivated at the terminals.

DG1 (Dialock Generation 1)